Esta secção não inclui de momento qualquer conteúdo. Adicione conteúdo a esta secção através da barra lateral.
Revitalized 1944P Visuals
Experience the power of 3K 1944P visuals, revealing every road sign and license plate with absolute clarity. Drive assured, with a clearer view of your front for safer journeys ahead.
Night Owl Vision
An exclusive technology that produces night image with higher clarity, lower noise, balanced exposure and better glare control.
HDR Dual-Channel Recording*
The front and rear dual-channel HDR setup, enhanced by the exclusive MaiColor Vivid+ Solution™ algorithm, excels in capturing clear details, even in challenging lighting conditions such as complex nighttime lights or sudden bursts of light when entering or exiting tunnels. *Rear Cam RC12 is required.
Sony STARVIS 2 IMX675
STARVIS 2, evolved from STARVIS, is the latest technology with a wider dynamic range. The high dynamic range has undergone a 10% enhancement, while the low-light imaging capability has seen a remarkable 90% improvement.
24H Smart Parking Surveillance
The dash cam records 1FPS footage in parking mode to save memory card space. Dash cam extends time-lapse recording to the rear camera for comprehensive playback and quick event recognition.
FAQs
In constant power mode, the dash cam is powered by the cigarette lighter plug, and the 'Auto OFF after stop' feature is not activated. You can fix this by enabling the 'Auto OFF after stop' function and setting an appropriate shutdown time.
Note: After enabling the function of “Auto OFF after stop” for a vehicle that is normally powered, you will need to manually press the power button to turn on the dash cam the next time you use it.
This dash cam model requires a power supply with 5V/2A input. It is recommended to use an official power supply accessories. If you prefer using a third-party power supply accessory, please make sure to opt for an accessory with power supply specifications that meet the requirements and comply with national safety regulations.
1. This dash cam is equipped with a self-protection function that prevents the device from powering on when the temperature is detected to be too high. In such situations, please wait for it to cool down to normal temperature before use.
2. Please check whether the car charger and power cord are abnormal.
3. After enabling the function of “auto power off with continuous inactivity” for a vehicle that is normally powered, you will need to manually press the power button to turn on the dash cam the next time you use it.
This happens because the dash cam is currently using 'low compression' encoding format.
Please change the encoding format to 'high compression' in the settings to get the 60 fps option.
Please check whether your mobile phone supports HEVC decoding, if it doesn’t, playback of the high compression coded dash cam video will not be available. This problem will not occur in mobile phones produced in the last four years. The 70mai APP will automatically detect whether the phone supports HEVC decoding and provide setting suggestions.
Based on the HDR mode realization principle, the amount of frame encoding calculation is equal to 60 fps under the setting of HDR+30 fps. HDR and 60 fps cannot be enabled simultaneously on mainstream dash cam controllers because the processing capability is insufficient.
This model is equipped with hardware-level HDR capability, which can greatly optimize the imaging effect in scenarios with strong brightness contrast, such as the following:
Entering and exiting tunnels or underground garages during the daytime on a sunny day;
Headlights shining directly on the license plate of the vehicle at night;
Shadow imaging of objects on the road in areas exposed to strong sunlight.
There are three functions in ADAS. They are Lane departure warning system, forward collision warning system and Forward Vehicle Start Alert system.
The front and back cam can record videos simultaneously and you can watch the videos in your album.
You can go to system settings (the second one in the dash cam screen)-system language (seems like the ninth one) to select your preferred language.
The speed and coordinates watermarks and brand logo watermark on the dash cam screen can be individually disabled. Simply select the 'dash cam settings' tab on the device or on your mobile phone to turn off the watermark. However, the date and timestamp cannot be turned off.