Cette section ne contient actuellement aucun contenu. Ajoutez-en en utilisant la barre latérale.

LED Front LOGO Pièce pour Seal
LED Front LOGO Pièce pour Seal
LED Front LOGO Pièce pour Seal
LED Front LOGO Pièce pour Seal
LED Front LOGO Pièce pour Seal
LED Front LOGO Pièce pour Seal

LED Front LOGO Pièce pour Seal

Prix régulier₱5,600.00
/
Frais d'expédition calculés lors du passage à la caisse.

Type
  • Retours faciles
  • Paiement sécurisé
  • 1 an de garantie
  • Assurance qualité
Pièces d'origine BYD

Ce composant est une pièce d'origine BYD. En raison des réglementations de sécurité en vigueur dans différents pays, BYD a désactivé la fonction d'éclairage de l'emblème sur les modèles d'exportation.

À l'origine, l'éclairage de l'emblème était conçu pour s'allumer lorsque le véhicule était déverrouillé la nuit et s'éteindre lorsque le véhicule était en mouvement.

Nous avons maintenant optimisé cette fonction tout en garantissant la sécurité. Grâce à cette amélioration, l'éclairage de l'emblème s'allume lorsque le véhicule est déverrouillé et mis sous tension et reste allumé jusqu'à ce que le véhicule soit mis hors tension. En d'autres termes, l'emblème lumineux restera allumé en permanence pendant la conduite.

Notre modification n'altère aucun câble et n'affecte donc pas la garantie d'origine.

Délai de traitement : Toutes les commandes sont traitées avec rapidité et dévouement. Nous nous efforçons d'expédier les commandes le plus rapidement possible. Les commandes sont traitées et expédiées dans les 24 à 48 heures pendant les jours ouvrables.

Délai de livraison : Les commandes expédiées aux États-Unis sont généralement livrées dans un délai de 2 à 5 jours ouvrables, mais peuvent prendre jusqu'à 10 jours ouvrables dans de rares cas.

Veuillez noter que certains produits ne sont pas accompagnés d'une vidéo d'installation car ils ne nécessitent pas ou peu d'installation. Cependant, si vous avez des questions concernant l'installation, veuillez nous contacter par chat en direct ou par e-mail et nous répondrons avec plaisir à toutes vos questions concernant l'installation.

Ce site est protégé par hCaptcha, et la Politique de confidentialité et les Conditions de service de hCaptcha s’appliquent.

Customer Reviews

Based on 9 reviews
78%
(7)
11%
(1)
0%
(0)
0%
(0)
11%
(1)
B
Brian Smith
Bit of a pain to fit with the bumper on but possible

Bit of a pain to fit with the bumper on but possible, but the result is great and not really noticeable during the day (I went for permanent on) and look great at night

P
Pierre-Gilles AKERMANN
Avec logo noir

J ai mis le logo lumineux avec le logo couleur noir.
C est parfait .

M
Matthew
Looks GREAT! Not hard to install.

Read the user manual and get an idea of the number of bolts and screws you need to remove.
The removal of the horn brackets is just so you have enough space to get your hands behind the front of the bonnet. Don't forget to put these back on afterwards.
No need to remove the frunk at all.
There is 1 screw on the bottom left hand side of the new part that didnt make it back in.
I used a small stubby 1/4" socket set and it worked a treat.

F
F
Great Product

Great product. Changes positively the look of the car. A little tricky to fit but with the right tools can be fitted without too much drama.

Happy with the product

B
Bryce Chiarelli
Front BYD

Installation was easier than expected and looks amazing. Slowly making my BYD SEAL unique and just the way I love it.

M
Matto
Favourite modification

The end result is well worth the effort. Some installation instructions would have been VERY helpful.
Most buyers would not likely care to take on such a project, unless they also have confidence in their mechanical ability.
This should be standard fitting on new vehicles in Australia.

A
Anonymous
Too complicated and no instructions to install

Too complicated and no instructions to install.

Hi,

Thank you for your message.

We noticed your feedback regarding the installation being complicated and lacking instructions. Please note that we have already sent the installation guide to your email, but we have not received a reply from you. Could you kindly check your inbox (and also the spam/junk folder) to confirm whether you received it?

If needed, we can resend the installation instructions right away. Please let us know.

Best Regards,
TOP BYD Aftermarket Accessories Team

G
Glenn

Works well, fits perfect, a little fiddly to get in but possible to install without removing the front bumper.

S
Stefano Valla
Good product

Good product and effective aesthetic result. The installation is not very simple but it can be done.